Mittens processus griseo ferrum

Casting industry said "three good" namely: good molten iron, good sand, good technology. Casting process in the manufacture of casting is one of the three elements with molten iron, sand parallel, if it is ignored, absolutely can not do a good casting. In the sand type, the model is used to make the casting, so that the molten iron flows into the cavity and make the casting, the casting process is the technology to study Et semita et modum et influat {{II}} Et mittens in: porta: et in lente ferrum de ferro sarcina in masting {{}}} {{{{V}} CALIX Effundens, {{{V}} CALIX Effundens, {{{{V}} Cup fluxus, in recto effundere alveo, {{V}} CALIX Effundens in alveo, in alveo, ut alveo cavity. Inner pouring: refers to the part where molten iron enters the cavity from the transverse pouring channel. Casting as a common saying is called "weir", which is an important part of the craft. Air vent: it is the hole that discharges the air inside the cavity with the filling type of molten iron. If the air permeability of the sand is appropriate, it is generally {{X}} Exit: inclusion in aquam ferrum et obstantia in mittebant ad exitus, sed propter refrigerationem DECREMENTUM deiectis, quod vocatur ad impletionem}}}}}}