Nos omnes nota cum malleo capite, in partibus periculum in malleo crusher, sed scis quod crusta bar est etiam a partis in malleus {{{I}}, et in tota est, quod est ad laborem, quod est in tota, quod est in Crater {II}} {{{
Sicut nos omnes scire, quod est valde facile ad gerunt et lacrimam de craticulam et retiaculum et retiaculis bar firmamentum de malleo, {.}, ut spero autem et lacrimam} {}}}
The first thing to consider is planning. Without affecting the operation and performance of the crusher, the grooved grate support frame used in the equipment design is changed to a non-groove grate support frame. This can effectively increase the length of material discharge, and at the same time, it can also The fixation of the grate bars plays a very good role and effectively solves the problem in the design of the hammer crusher that the outer edge of the tank with A Sulcat Gate Bar Support frame non support in craticulam vectes postquam attrita {{III}}
Mutare in brevi gradte vectes in longum gradte vectes cum convexa ore in medio {.} simul, amplio et ad conflandum parva structura, {{{}} laminis structuram et utraque parte {{{}}}}
The other thing is to drill screw holes with the same drill diameter directly above the screw holes and process them into long annular hole shapes. After doing this, the unused screw holes are welded and sealed. The purpose of welding and sealing is to Prevent the scattering of dust. By improving the grate bars of the hammer crusher, the wear of the grate bars can be effectively reduced, Saving multum pecuniae in reparationibus et aliis facies {{III}}
